Thursday, December 12, 2013

The inside walls should be firred off for plastering

The inside walls should be firred off for plastering



In a stone, or brick house, the inside walls should be firred off for plastering. This may be done either by "plugging," that is, driving a plug of wood strongly into the mortar courses, into which the firring should be nailed, or by laying a strip of thin board in the mortar course, the entire length of each wall. This is better than blocks laid in for such purpose, because it is effectually bound by the stone, or brick work; whereas, a block may get loose by shrinking, but the nails which hold the firring to the plug, or to the thin strip of board will split and wedge it closer to the mason work of the outside wall. This is an important item. It makes close work too, and leaves no room for rats, mice, or other vermin; and as it admits a space - no matter how thin - so that no outside damp from the walls can communicate into, or through the inner plastering, it answers all purposes. The inside, and partition walls should be of coarse, strong mortar, floated off as smoothly as may be, not a hard finish, which is fine, and costly; and then papered throughout for the better rooms, and the commonly-used rooms whitewashed.

Paper gives a most comfortable look to the rooms, more so than paint, and much less expensive, while nothing is so sweet, tidy, and cheerful to the working rooms of the house as a lime wash, either white, or softened down with some agreeable tint, such as light blue, green, drab, fawn, or russet, to give the shade desired, and for which every professional painter and whitewasher in the vicinity, can furnish a proper recipe applicable to the place and climate. On such subjects we choose to prescribe, rather than to play the apothecary by giving any of the thousand and one recipes extant, for the composition.



Fonte: Rural Architecture. Farm Houses.

No comments:

Post a Comment